base voltage
英 [beɪs ˈvəʊltɪdʒ]
美 [beɪs ˈvoʊltɪdʒ]
网络 基准电压; 基电压; 基极电压; 基本电压
双语例句
- The proposed system can measure the key parameters of monomer cell in base station such as voltage, current and temperature, which are then transmitted via public GPRS channel.
该监测系统可以对基站电池端电压、充放电电流和电池温度3种主要参数进行监测。 - On base of voltage correcting and reactive power optimization, a new scheme of real-time voltage and reactive power control is presented.
将电压校正和无功优化相结合，提出电压/无功实时控制的新思路。 - The reference track 、 base functions and constrain condition of voltage are chosen according to the characteristic of the dynamic responses of mechanism and actuator material. Through optimizing weight coefficients of base functions, the output control voltage is reached.
根据机构的动态特性，选取系统变形响应的参考轨迹、基函数、优化指标和电压约束条件，通过优化基函数的加权系数，得到结构化的控制电压，对机构进行控制。 - Calculation of Interval between Mobile Communication Base Station and High Voltage Power System
移动通信基站与高压电力系统的隔距计算 - On the base of the control models between motor voltage and oil flow, also motor current and oil pressure, a motor controller with a composite output characteristic of both constant voltage and constant current is designed.
通过建立电机电压与油泵流量、电机电流与油泵压力的数学模型，设计了具有恒压和恒流复合输出特性的电机控制器。 - In this paper, the variation of the output base voltage and low-order harmonics in different conditions are analyzed, the models of calculation are setup, the simulated curves are given. Experiment results show the validity of the analysis.
文章对不同使用条件下死区时间引起的输出电压基波、低次谐波的变化规律进行了系统分析，建立了定量计算的数学模型，给出了仿真曲线，并以实验结果作了验证。 - Welding stability pattern recognition used SVM base on approximate entropy of voltage signal
基于电压信号近似熵对铝合金脉冲MIG焊过程稳定性SVM模式识别 - Trouble diagnosis of power electronic circuit on the base of output voltage
基于输出电压波形的电路故障诊断 - Welding parameters are optimized by adjusting the peak and base voltage value, pulse frequency, duty ratio and so on. It can be guide of high-efficient welding method and new Multi-wire pulsed welding machine.
通过验证性实验对峰值电压、基值电压、脉冲频率、占空比等参数的调节证明了控制器的功能性和可靠性，对高效化焊接方法和新型多丝脉冲焊机的研制具有指导意义。 - It also analyzed the influence of the simulation parameters ( pulsed frequency/ assumed peak voltage/ assumed base voltage) and the wire feeding speed on the simulation waveform.
本文还分析了脉冲参数（脉冲频率、设定峰值电压、设定基值电压）及送丝速度对仿真波形的影响。